Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RL26 and 300wsm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dougduey" data-source="post: 1422908" data-attributes="member: 33159"><p>I'll agree with you on the 200 ELDX in the 300 WSM. Mine loves it! I developed the load with RL17 before RL26 was available. Ragged 5 shot hole at 100 yards using 62.8 gr of RL17 and a COAL of 2.855" and 2952 fps. I normally use a COAL of 2.86 or longer, but seating down to 2.855" just snugged the load up. That bullet is a hammer on elk. I dropped a nice 5x5 NM bull in his tracks. It was like somebody pulled the rug out from under him</p></blockquote><p></p>
[QUOTE="dougduey, post: 1422908, member: 33159"] I'll agree with you on the 200 ELDX in the 300 WSM. Mine loves it! I developed the load with RL17 before RL26 was available. Ragged 5 shot hole at 100 yards using 62.8 gr of RL17 and a COAL of 2.855" and 2952 fps. I normally use a COAL of 2.86 or longer, but seating down to 2.855" just snugged the load up. That bullet is a hammer on elk. I dropped a nice 5x5 NM bull in his tracks. It was like somebody pulled the rug out from under him [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
RL26 and 300wsm
Top