Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Resizing help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DSheetz" data-source="post: 1863981" data-attributes="member: 91783"><p>Your necks may need turned as they might be tight . Try one piece of brass that you have sized measure the neck then chamber it a couple of time and remeasure the neck to see if the chamber necks it down more , make all of the measurements on the brass not just the neck but the length and diameter as well so that as your chamber changes your case you will know what it is changing . Your chamber will work the brass like your die does but it takes a couple of times to over come the spring back .</p></blockquote><p></p>
[QUOTE="DSheetz, post: 1863981, member: 91783"] Your necks may need turned as they might be tight . Try one piece of brass that you have sized measure the neck then chamber it a couple of time and remeasure the neck to see if the chamber necks it down more , make all of the measurements on the brass not just the neck but the length and diameter as well so that as your chamber changes your case you will know what it is changing . Your chamber will work the brass like your die does but it takes a couple of times to over come the spring back . [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Resizing help
Top