Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Resizing 338 Excalibur
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Autorotate" data-source="post: 606330" data-attributes="member: 8073"><p>Yes, you should be able to neck down the 338 Excalibur brass to 300 Pegasus.</p><p> </p><p>But...You may run into a neck clearance issue depending on the reamer used to cut your chamber, as the neck wall thickness may increase up to .002 to .003.</p><p> </p><p>Can you measure the diameter of the case neck on one of your fired 300 Peg cases? </p><p> </p><p>Can you measure the diameter of a case neck of a loaded 300 Peg case?</p><p> </p><p>Post those two dimensions....and we'll see if this has a good chance at working in your gun....without having to neck turn the 338 Excalibur cases.</p></blockquote><p></p>
[QUOTE="Autorotate, post: 606330, member: 8073"] Yes, you should be able to neck down the 338 Excalibur brass to 300 Pegasus. But...You may run into a neck clearance issue depending on the reamer used to cut your chamber, as the neck wall thickness may increase up to .002 to .003. Can you measure the diameter of the case neck on one of your fired 300 Peg cases? Can you measure the diameter of a case neck of a loaded 300 Peg case? Post those two dimensions....and we'll see if this has a good chance at working in your gun....without having to neck turn the 338 Excalibur cases. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Resizing 338 Excalibur
Top