Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Remington Model Seven Custom Build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DJ Fergus" data-source="post: 2242631" data-attributes="member: 93895"><p>I just got thru with a model seven 6.5 GAP saum. I went with a 26" 3B bartlien. It equals out to be as long as a 25" barreled 700 long action. I really like the 3B countour. I had to inlet the stock because I wanted the full 26 inches and that left it fat on the shank end cause hardly any could be taken off of the shank end. If you go with a 24 or 22 inch 3B, then you could have it shortened on the shank end and have minimal inleting done to fit in a regular model seven stock. From what you mentioned, I would lean towards the 7mm-08. I do like mine in the 6.5 GAP saum but it did take alot of work for me to fit it into the magazine and still be able to load the bullet out to the lands. It wasn't a task for the faint hearted.</p></blockquote><p></p>
[QUOTE="DJ Fergus, post: 2242631, member: 93895"] I just got thru with a model seven 6.5 GAP saum. I went with a 26" 3B bartlien. It equals out to be as long as a 25" barreled 700 long action. I really like the 3B countour. I had to inlet the stock because I wanted the full 26 inches and that left it fat on the shank end cause hardly any could be taken off of the shank end. If you go with a 24 or 22 inch 3B, then you could have it shortened on the shank end and have minimal inleting done to fit in a regular model seven stock. From what you mentioned, I would lean towards the 7mm-08. I do like mine in the 6.5 GAP saum but it did take alot of work for me to fit it into the magazine and still be able to load the bullet out to the lands. It wasn't a task for the faint hearted. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Remington Model Seven Custom Build
Top