Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading With A Suppressor
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="CaptnC" data-source="post: 1931857" data-attributes="member: 101755"><p>Well...gas block did help pressure issues with load.</p><p></p><p>Tamed the recoil quite a bit. Which is why I bought an adjustable gas block in the first place.</p><p></p><p>Ammo that has worked fine in other guns (out to 24") had a lot of brass flow back into the bolt face. Same with the firing pin hole...primer is flowing back into firing pin hole in the bolt face.</p><p></p><p>But I had already backed off the powder charge on the bullet I want to use. It looks like I will go with it. 120gr Barnes TAC-X running at 2200fps should be ok out to 100 yards.</p><p></p><p>I also changed the settings in my Magnetospeed and it worked well enough to learn some things.</p><p>[ATTACH=full]200925[/ATTACH]</p><p></p><p>I think the shorter barrels dont like H335. My 18", 20" and 24" had no issues with that powder. My best velocities were with 8208...which is a huge surprise to me. None of my other Grendel's have done well with it.</p><p></p><p>Because I was thinking I might have to pull the hand guard I went dont to the long rang area of the range, so I did put up a target...just shot them into the berm. </p><p></p><p>When I was at 100 yards the latest load is hunting ready though.</p><p>[ATTACH=full]200926[/ATTACH]</p></blockquote><p></p>
[QUOTE="CaptnC, post: 1931857, member: 101755"] Well...gas block did help pressure issues with load. Tamed the recoil quite a bit. Which is why I bought an adjustable gas block in the first place. Ammo that has worked fine in other guns (out to 24") had a lot of brass flow back into the bolt face. Same with the firing pin hole...primer is flowing back into firing pin hole in the bolt face. But I had already backed off the powder charge on the bullet I want to use. It looks like I will go with it. 120gr Barnes TAC-X running at 2200fps should be ok out to 100 yards. I also changed the settings in my Magnetospeed and it worked well enough to learn some things. [ATTACH type="full"]200925[/ATTACH] I think the shorter barrels dont like H335. My 18", 20" and 24" had no issues with that powder. My best velocities were with 8208...which is a huge surprise to me. None of my other Grendel's have done well with it. Because I was thinking I might have to pull the hand guard I went dont to the long rang area of the range, so I did put up a target...just shot them into the berm. When I was at 100 yards the latest load is hunting ready though. [ATTACH type="full"]200926[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading With A Suppressor
Top