Redding 338 edge dies

[paulatherton21]

I need a set of 338 edge dies. Would prefer the redding type s dies with the bushing sizing die and micrometer seating die.

I've found some whidden custom dies, but I've heard lots of negative stuff on the whidden dies.

Thanks
Paul

 

[canyonhunter]

Call Shawn Carlock not only did he and his Dad Bob develop the 338 Edge they have their own line of reloading dies ! 208-687-2659 these guys know more about the 338 Edge than anyone on the planet.

 

[paulatherton21]

They are currently sold out. Thanks though!

 

[paulatherton21]

Bump

 

[paulatherton21]

Please

 

[Rum Man]

I'm going to PM you .
I will help you out !

Rum Man

 

[bmnkbrandon]

I got a set of whidden custom dies and they have worked well for neck sizing and bumping. Only thing is the kit they sell for 338 bushings didn't work so I had to order a bushing 2 thou larger than the largest one that came in the kit to get 1 thou neck tension. The bullet seating die works great but the micrometer isn't exact on it. If I adjust the micrometer 20 thou, I get about 23 thou deeper bullet seating. Other than that though they have been solid dies for my edge once I worked out the kinks. Just my experience but good luck with the edge man!