Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
recommended powders and loads for the 270Win
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Capt RB" data-source="post: 1859254" data-attributes="member: 85987"><p>I ran 60.0 of H4831 for over 30 years. I had H4831 pulldown powder or surplus which is closer to IMR7828 today in speed. The drops figured out to 3150 for me.</p><p>I tried Rl26 a few years ago. I ran ladders with 130s, 140s 145s and 150s. 130's I shoot at 3139 ES3 SD>1 Didn't hit pressure saw 3215fps with Magneto Speed. The 140 gamechangers bottom group also shoot at 3140 ES 1 over 3 shots. The top before I stopped and went back to the load I use was @ 3190fps. 145's i hit pressure At 3240. I had to see where it was have not done anything with these since. 150 interbonds in another weatherby vangard not mine has a .030 shorter throat. I hit pressure at 3170fps. He is shooting them at 3105 ES 5 Sd2.1. The 130s are Fed brass everything else is Winchester brass.</p><p>The top target is a day I had just shot drops to 650. I had .1 right wind dialed and my zero is 200yds this is 100yds. 130sst</p><p>Second target is the same load at 620yds. My students had a perfect wind day but as they went longer the targets were showing a l to r wind at 1-2mph. I told them this and said my bullet should hit about 4" to the right and 1" low if it's 1mph</p><p>The 3rd target was again 100yds with a 200yd zero</p><p>Rifle is a weatherby vangard now in an MDT LSS-XL chassis. I had an issue with the rings but since I have had the most solid zero this rifle has ever had. Bought new in 1998</p></blockquote><p></p>
[QUOTE="Capt RB, post: 1859254, member: 85987"] I ran 60.0 of H4831 for over 30 years. I had H4831 pulldown powder or surplus which is closer to IMR7828 today in speed. The drops figured out to 3150 for me. I tried Rl26 a few years ago. I ran ladders with 130s, 140s 145s and 150s. 130's I shoot at 3139 ES3 SD>1 Didn't hit pressure saw 3215fps with Magneto Speed. The 140 gamechangers bottom group also shoot at 3140 ES 1 over 3 shots. The top before I stopped and went back to the load I use was @ 3190fps. 145's i hit pressure At 3240. I had to see where it was have not done anything with these since. 150 interbonds in another weatherby vangard not mine has a .030 shorter throat. I hit pressure at 3170fps. He is shooting them at 3105 ES 5 Sd2.1. The 130s are Fed brass everything else is Winchester brass. The top target is a day I had just shot drops to 650. I had .1 right wind dialed and my zero is 200yds this is 100yds. 130sst Second target is the same load at 620yds. My students had a perfect wind day but as they went longer the targets were showing a l to r wind at 1-2mph. I told them this and said my bullet should hit about 4" to the right and 1" low if it's 1mph The 3rd target was again 100yds with a 200yd zero Rifle is a weatherby vangard now in an MDT LSS-XL chassis. I had an issue with the rings but since I have had the most solid zero this rifle has ever had. Bought new in 1998 [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
recommended powders and loads for the 270Win
Top