Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Rebarrel a Christensen or sell?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Vol1975" data-source="post: 2262238" data-attributes="member: 100380"><p>Clean the gun good and try a different scope. I do sweets then I follow up with carbon bore tech. Carbon I have found will cause some issues.</p><p></p><p>one other thing. The break should be cleaned also. being a 308 there should be a certain clearance between the bullet diameter and the break opening. If the break fouls easy and that opening is reduced it will cause accuracy issues. </p><p>probably not it but it worth checking to see if the clearances are correct.</p><p></p><p>a quick seach on google seam most brakes are oversized .020 to .030 thou over bore size. Seems .020 is the minimum with most going above .030 over bore size. </p><p></p><p>and it seems some from the factory have been installed tight. Easy check on dirtyest level and size. Maybe take brake off and shoot.</p></blockquote><p></p>
[QUOTE="Vol1975, post: 2262238, member: 100380"] Clean the gun good and try a different scope. I do sweets then I follow up with carbon bore tech. Carbon I have found will cause some issues. one other thing. The break should be cleaned also. being a 308 there should be a certain clearance between the bullet diameter and the break opening. If the break fouls easy and that opening is reduced it will cause accuracy issues. probably not it but it worth checking to see if the clearances are correct. a quick seach on google seam most brakes are oversized .020 to .030 thou over bore size. Seems .020 is the minimum with most going above .030 over bore size. and it seems some from the factory have been installed tight. Easy check on dirtyest level and size. Maybe take brake off and shoot. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Rebarrel a Christensen or sell?
Top