Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reading a ladder test
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="D.Camilleri" data-source="post: 1651124" data-attributes="member: 2567"><p>Blackdirt,</p><p></p><p>I have been shooting the 338 rum since 2002 and have a lot of good recipes. Right now my go to load is 100 gr of RL33 with a 285 Hornady ELDM that runs right at 3000 out of a 26 inch Bartlein Barrel. The same load runs 2930 out of my other gun with a Broughton barrel. 99 grains of RL33 with 300 gr Bergers and Accubonds yields right at 2850 from the bartlein and 2830 from the Broughton.</p><p></p><p>When breaking in my Barlein barrel, I gained some velocity after around 100 rounds. would love to have some VITN570 to try with my 285's and 300's, and I wonder if it is a little too slow for the 250's. I would try some H-1000 with your 250's and see if you can't gain some speed. I run 97 grs of H-1000 with accubond 225's at around 3250, but I haven't played much with 250's</p></blockquote><p></p>
[QUOTE="D.Camilleri, post: 1651124, member: 2567"] Blackdirt, I have been shooting the 338 rum since 2002 and have a lot of good recipes. Right now my go to load is 100 gr of RL33 with a 285 Hornady ELDM that runs right at 3000 out of a 26 inch Bartlein Barrel. The same load runs 2930 out of my other gun with a Broughton barrel. 99 grains of RL33 with 300 gr Bergers and Accubonds yields right at 2850 from the bartlein and 2830 from the Broughton. When breaking in my Barlein barrel, I gained some velocity after around 100 rounds. would love to have some VITN570 to try with my 285's and 300's, and I wonder if it is a little too slow for the 250's. I would try some H-1000 with your 250's and see if you can't gain some speed. I run 97 grs of H-1000 with accubond 225's at around 3250, but I haven't played much with 250's [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reading a ladder test
Top