Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Question for the Hammer Guys
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="just_jon" data-source="post: 2676959" data-attributes="member: 112153"><p>No experience with the 6x45, but you will need a fast burning powder. I was in QL doing some research and decided to look your combo up. The only powders I found that reached anyway near the max pressure of 55,000 psi without a significantly compressed load were H4198 and N110. </p><p></p><p>H4198 @ 100% fill rate is 24.2 grains at 49,300 psi</p><p>N110 @ 93% fill rate is 20.3 grains at 54,900 psi</p></blockquote><p></p>
[QUOTE="just_jon, post: 2676959, member: 112153"] No experience with the 6x45, but you will need a fast burning powder. I was in QL doing some research and decided to look your combo up. The only powders I found that reached anyway near the max pressure of 55,000 psi without a significantly compressed load were H4198 and N110. H4198 @ 100% fill rate is 24.2 grains at 49,300 psi N110 @ 93% fill rate is 20.3 grains at 54,900 psi [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Question for the Hammer Guys
Top