Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
problems!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ohiohunter" data-source="post: 1064688" data-attributes="member: 55230"><p>Your wording is very confusing CLICKS or INCHES? You have 65in of travel which is 260clicks. There is a big difference and is vital to diagnosing your problem. Its like inches and feet, they are not interchangeable. </p><p></p><p>Yes you will sacrifice some elevation when you are zeroed, everyone does. It would be very hard to put your 200yd zero at the absolute extreme of your elevation. With a 0 moa base you can expect to be near the middle of your glass at your zero so yes you are wasting approximately 33in of elevation right away. BUT 33in at 100yds, at 1000yds it is 330in. In your case it sounds like you've used 25in, not clicks, which leaves you with 40" to use. </p><p></p><p>Are you basing your information on your calculations? Or have you gone to the range and tried to shoot 1k? Every 100yds you increase the factor by one so 1in (4clicks)at 100yds is 10in(4clicks) at 1000yds.</p></blockquote><p></p>
[QUOTE="ohiohunter, post: 1064688, member: 55230"] Your wording is very confusing CLICKS or INCHES? You have 65in of travel which is 260clicks. There is a big difference and is vital to diagnosing your problem. Its like inches and feet, they are not interchangeable. Yes you will sacrifice some elevation when you are zeroed, everyone does. It would be very hard to put your 200yd zero at the absolute extreme of your elevation. With a 0 moa base you can expect to be near the middle of your glass at your zero so yes you are wasting approximately 33in of elevation right away. BUT 33in at 100yds, at 1000yds it is 330in. In your case it sounds like you've used 25in, not clicks, which leaves you with 40" to use. Are you basing your information on your calculations? Or have you gone to the range and tried to shoot 1k? Every 100yds you increase the factor by one so 1in (4clicks)at 100yds is 10in(4clicks) at 1000yds. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
problems!
Top