Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Primer Seating?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bamban" data-source="post: 2596235" data-attributes="member: 17722"><p>Take that swaging tool instead of the spud that goes into the pocket, face that off and machine a pocket that larger the primer pocket. Then chamfer the outside into somewhat of a knife edge to grab the edge of the primer pocket.</p><p></p><p>The operation is similar to the swaging operation</p><p></p><p>Can modify the tool on the lathe or using mill and 5C collet indexer with sacrificial collet that you can mill a pocket in it to hold the swaging tool. Once sacrificial collet is machined, clamp the swaging tool, verify center with coaxial indicator. Mill away.</p><p></p><p>Here's an example: The 5C sacrificial brass collet I used to modify the windage knob for my M1 and M1A 1/2 minute windage ball and detent. Never like the NM rotatable rear sight aperture for half minute clicks</p><p></p><p>[ATTACH=full]386418[/ATTACH]</p></blockquote><p></p>
[QUOTE="bamban, post: 2596235, member: 17722"] Take that swaging tool instead of the spud that goes into the pocket, face that off and machine a pocket that larger the primer pocket. Then chamfer the outside into somewhat of a knife edge to grab the edge of the primer pocket. The operation is similar to the swaging operation Can modify the tool on the lathe or using mill and 5C collet indexer with sacrificial collet that you can mill a pocket in it to hold the swaging tool. Once sacrificial collet is machined, clamp the swaging tool, verify center with coaxial indicator. Mill away. Here's an example: The 5C sacrificial brass collet I used to modify the windage knob for my M1 and M1A 1/2 minute windage ball and detent. Never like the NM rotatable rear sight aperture for half minute clicks [ATTACH type="full"]386418[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Primer Seating?
Top