Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
primer pocket blow out.???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Bob Wright" data-source="post: 1397781" data-attributes="member: 104363"><p>Inspected 20 out of a batch of brass from Nosler after about 3 firings using a no-go pin gage and 80% of my brass fails primer pocket diameter inspection at .210 diameter max per SAAMI. Guess I'm cleaning house and certainly will inspect all my large rifle primer brass in this manner from now on. I use a .209 dia. pin for a "go" pin, but the minimum is actually .2085 diameter. Primer seating by "feel" is pretty subjective.</p></blockquote><p></p>
[QUOTE="Bob Wright, post: 1397781, member: 104363"] Inspected 20 out of a batch of brass from Nosler after about 3 firings using a no-go pin gage and 80% of my brass fails primer pocket diameter inspection at .210 diameter max per SAAMI. Guess I'm cleaning house and certainly will inspect all my large rifle primer brass in this manner from now on. I use a .209 dia. pin for a "go" pin, but the minimum is actually .2085 diameter. Primer seating by "feel" is pretty subjective. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
primer pocket blow out.???
Top