Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Primer backout problems
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Wayfaroff" data-source="post: 81711" data-attributes="member: 4539"><p>I trim all cases to the same length, use an electronic scale to weigh each round, bullets are all seated to 2.80 oal. Use a wilson headspace gauge to set the resizing die, to spec. 41grs -42 grs of H4895 should be fine, not to lite, or to hot. Fired brass fits perfectly in the gauge.</p><p></p><p>Could be the FC brass is to soft after a couple of firings.</p><p>Primer pocker stretched.</p><p>Chamber is smooth and clean, bolt face looks fine.</p><p>Will try resizing and chambering until the bolt closes per</p><p>suggestions.</p><p>And will try a different brand of brass and primer.</p><p>Thanks to everyone for their ideas and suggestions.</p></blockquote><p></p>
[QUOTE="Wayfaroff, post: 81711, member: 4539"] I trim all cases to the same length, use an electronic scale to weigh each round, bullets are all seated to 2.80 oal. Use a wilson headspace gauge to set the resizing die, to spec. 41grs -42 grs of H4895 should be fine, not to lite, or to hot. Fired brass fits perfectly in the gauge. Could be the FC brass is to soft after a couple of firings. Primer pocker stretched. Chamber is smooth and clean, bolt face looks fine. Will try resizing and chambering until the bolt closes per suggestions. And will try a different brand of brass and primer. Thanks to everyone for their ideas and suggestions. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Primer backout problems
Top