Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Pressure signs with factory ammo
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="WGTX" data-source="post: 1940104" data-attributes="member: 99629"><p>Like the title says factory ammo, I do have questions related to reloading though. Little background, very new to reloading, I've successfully made a few hundred .223 & .308 lately just tryin to learn the basics. The issue/questions are about a 26 Nosler that I traded for. It supposed has low round count but who knows. Came with 80 rounds of 140 ab and 60 of 142 ablr. I have had it quite a while but had only shot a few rounds through it about a year ago and didn't think much about it. So forward to now and with the limited knowledge I've gained (a lot of it from this site) made me question what I saw yesterday from this factory ammo. First picture is the 142s, second the 140s. The 142s cbto averaged 2.706, the 140s 2.766. I pulled one of the 142s to measure with, I was surprised how scared it was when I did, I've only pulled a couple .223s that I've loaded,they didn't look like this (3rd pic), had 71.1gr of whatever Nosler loads. So using the Hornady tool jammed all the way I come up with 2.839 and just touching 2.703. This is where the questions start, I'm unsure of my process measuring, jammed all the way seems simple enough, just touching much harder to be consistent. I started out yesterday with a clean, pretty close to bare, dry bore and chamber. All rounds resulted in stiff bolt lift, not have to death grip or pick up the rifle but definitely stiff. Would it make sense to pull/reseat bullets in the factory ammo for some jump ? Or dump the powder and try something different ? BTW velocity average was 3251 and of the powders listed in the Nosler manual 71.1 should be pretty mild. With a bore scope I can see what maybe a carbon ring starting ? after 15 rounds that wasn't there when I started. Am I overthinking this ? Couple years ago I'd have looked at the brass and thought that's weird and kept right on stuffing and shooting, lol. Any advice is appreciated. Hope the pictures load, my sat internet is pretty lame.</p></blockquote><p></p>
[QUOTE="WGTX, post: 1940104, member: 99629"] Like the title says factory ammo, I do have questions related to reloading though. Little background, very new to reloading, I’ve successfully made a few hundred .223 & .308 lately just tryin to learn the basics. The issue/questions are about a 26 Nosler that I traded for. It supposed has low round count but who knows. Came with 80 rounds of 140 ab and 60 of 142 ablr. I have had it quite a while but had only shot a few rounds through it about a year ago and didn’t think much about it. So forward to now and with the limited knowledge I’ve gained (a lot of it from this site) made me question what I saw yesterday from this factory ammo. First picture is the 142s, second the 140s. The 142s cbto averaged 2.706, the 140s 2.766. I pulled one of the 142s to measure with, I was surprised how scared it was when I did, I’ve only pulled a couple .223s that I’ve loaded,they didn’t look like this (3rd pic), had 71.1gr of whatever Nosler loads. So using the Hornady tool jammed all the way I come up with 2.839 and just touching 2.703. This is where the questions start, I’m unsure of my process measuring, jammed all the way seems simple enough, just touching much harder to be consistent. I started out yesterday with a clean, pretty close to bare, dry bore and chamber. All rounds resulted in stiff bolt lift, not have to death grip or pick up the rifle but definitely stiff. Would it make sense to pull/reseat bullets in the factory ammo for some jump ? Or dump the powder and try something different ? BTW velocity average was 3251 and of the powders listed in the Nosler manual 71.1 should be pretty mild. With a bore scope I can see what maybe a carbon ring starting ? after 15 rounds that wasn’t there when I started. Am I overthinking this ? Couple years ago I’d have looked at the brass and thought that’s weird and kept right on stuffing and shooting, lol. Any advice is appreciated. Hope the pictures load, my sat internet is pretty lame. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Pressure signs with factory ammo
Top