Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder Question for 7mm Mag
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jmcarrol" data-source="post: 2019520" data-attributes="member: 27810"><p>My gun is throated for 180s so please don't use my load to start. The load I got from Travis was 69 gr RE 26. Dummy round was 3.47 coal. Using my comparator on the dummy round, I can get the 168s to the same length to ogive and still have enough bullet in the case without boat tail being in the neck. His load was with Remington brass and cci 250s. I have Norma brass and Fed 215ms so I'll start around 67 for the 168s. If no luck, I'll just use 180s and work up to his pet load.</p></blockquote><p></p>
[QUOTE="jmcarrol, post: 2019520, member: 27810"] My gun is throated for 180s so please don’t use my load to start. The load I got from Travis was 69 gr RE 26. Dummy round was 3.47 coal. Using my comparator on the dummy round, I can get the 168s to the same length to ogive and still have enough bullet in the case without boat tail being in the neck. His load was with Remington brass and cci 250s. I have Norma brass and Fed 215ms so I’ll start around 67 for the 168s. If no luck, I’ll just use 180s and work up to his pet load. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder Question for 7mm Mag
Top