Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Please HELP!! Low pressure???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Colin78" data-source="post: 1952799" data-attributes="member: 104391"><p>The COAL is 2.966" and yes if you don't mind running it for all 3 of those powders that would be awesome. </p><p></p><p>Attached is my results from today with more powder and the Hornady brass that gave me .0025 neck tension. I did not have any high pressure signs at all with these loads so I plan to keep going up and see what I come up with. </p><p></p><p>Not sure how this plays into everything but the loaded neck diameter of the ADG brass is .291. The loaded neck diameter of the Hornady brass is .293 so a full 2 thousandths fatter. The dummy round I used to built the reamer was with the Hornady brass. Does that mean there would be a big gap when using ADG brass?</p></blockquote><p></p>
[QUOTE="Colin78, post: 1952799, member: 104391"] The COAL is 2.966” and yes if you don’t mind running it for all 3 of those powders that would be awesome. Attached is my results from today with more powder and the Hornady brass that gave me .0025 neck tension. I did not have any high pressure signs at all with these loads so I plan to keep going up and see what I come up with. Not sure how this plays into everything but the loaded neck diameter of the ADG brass is .291. The loaded neck diameter of the Hornady brass is .293 so a full 2 thousandths fatter. The dummy round I used to built the reamer was with the Hornady brass. Does that mean there would be a big gap when using ADG brass? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Please HELP!! Low pressure???
Top