Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
7mm STW
Peterson Brass Belted Mag Basic Unprimed Box of 50
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="josh_127" data-source="post: 3037541" data-attributes="member: 119169"><p>Finally got my reloading room halfway setup and started playing with my new Neil Jones custom die...formed cases with his stepdown bushings and so far everything is coming out perfectly. I do have to trim the necks .060 as they're measuring way long but the shoulders are coming out perfectly where I want them. Only gripe I got is the neck thickness is only .0125...my nosler brass is .0155( neck turned to be perfect). My chamber has a .319 neck which means I have .010 neck clearance...a bit much for my liking..I ran the necks long for first firing (2.863 oal) as I know my chamber is 2.871...im hoping on the first firing as the shoulder forms as it should when the neck shrinks back it'll thicken up some...the plan is to trim the fired cases back to 2.855 if they're not there already after firing.</p></blockquote><p></p>
[QUOTE="josh_127, post: 3037541, member: 119169"] Finally got my reloading room halfway setup and started playing with my new Neil Jones custom die...formed cases with his stepdown bushings and so far everything is coming out perfectly. I do have to trim the necks .060 as they're measuring way long but the shoulders are coming out perfectly where I want them. Only gripe I got is the neck thickness is only .0125...my nosler brass is .0155( neck turned to be perfect). My chamber has a .319 neck which means I have .010 neck clearance...a bit much for my liking..I ran the necks long for first firing (2.863 oal) as I know my chamber is 2.871...im hoping on the first firing as the shoulder forms as it should when the neck shrinks back it'll thicken up some...the plan is to trim the fired cases back to 2.855 if they're not there already after firing. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
7mm STW
Peterson Brass Belted Mag Basic Unprimed Box of 50
Top