Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Once fired brass from different rifle
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="44-40" data-source="post: 2857335" data-attributes="member: 126985"><p>Belted mag, size to fit your rifles chamber on the shoulder, just so the bolt closes with a .003" extra this can be measured. With different case brands mixed lots of Brass from different manufactures have different spring back and neck thicknesses...plus they may be more than once fired. After firing in your chamber one brand of case may require a different bushing to get your desired neck tension when sizing FL or just sizing the necks ... example 308 LC and Lapua brass get the same bushing...winchester case a different bushing...or oversize some and mandrel up. I do hundreds of 350 Rem Mag over the yrs. from 7mm R mag 338 Win mag, 300 win mag and a few old 300H&H to 350 mag...but the long cases especially requires neck turning to the shoulder and boring the case necks in a lathe where it's quick to do.</p></blockquote><p></p>
[QUOTE="44-40, post: 2857335, member: 126985"] Belted mag, size to fit your rifles chamber on the shoulder, just so the bolt closes with a .003" extra this can be measured. With different case brands mixed lots of Brass from different manufactures have different spring back and neck thicknesses...plus they may be more than once fired. After firing in your chamber one brand of case may require a different bushing to get your desired neck tension when sizing FL or just sizing the necks ... example 308 LC and Lapua brass get the same bushing...winchester case a different bushing...or oversize some and mandrel up. I do hundreds of 350 Rem Mag over the yrs. from 7mm R mag 338 Win mag, 300 win mag and a few old 300H&H to 350 mag...but the long cases especially requires neck turning to the shoulder and boring the case necks in a lathe where it's quick to do. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Once fired brass from different rifle
Top