Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
OCW Test help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="JTH" data-source="post: 2593393" data-attributes="member: 59647"><p>Thanks for the replies.</p><p></p><p>All of my brass is full length sized, annealed and necks have been turned. Neck tension is 0.003, and I use a Lee FCD after seating bullets. Seating depth test was performed from 0.020 off to 0.100 off in 0.010 increments, 0.050 off was the best.</p><p></p><p>I'm using the Micron dies from Bullet Central.</p><p></p><p>I'll head back to the 600 yard range with some loaded at 81.3 and see what that produces.</p></blockquote><p></p>
[QUOTE="JTH, post: 2593393, member: 59647"] Thanks for the replies. All of my brass is full length sized, annealed and necks have been turned. Neck tension is 0.003, and I use a Lee FCD after seating bullets. Seating depth test was performed from 0.020 off to 0.100 off in 0.010 increments, 0.050 off was the best. I’m using the Micron dies from Bullet Central. I’ll head back to the 600 yard range with some loaded at 81.3 and see what that produces. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
OCW Test help
Top