Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Not long range but powder question quickload help?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="kweidner" data-source="post: 1010881" data-attributes="member: 4964"><p>Developing some 300 blackout subsonic stuff. I have a question for those of you that have quickload. Viht n133 sits right between IMR and hodgdon 4198. plenty of data on 4198 but none on N133. Hodgdon shows a 208 amax subsonic load of 11 grains of 4198 it also shows a 16.9 grain compressed load in a bullet similar so the bulkiness is real close as you will see below. </p><p></p><p> I have a swaged 190 hollowpoint jacketed I would like to use along with n133 as I have 16#. </p><p></p><p>After seating bullet, there is 1.03 inches left for powder in the case. I filled the case to where the bullet would not compress the powder and then weighed and came up with a 100 percent fill non compressed as 15.9 grains . </p><p></p><p>11 grains of n133 would give a 69% 10 grains is 56% fill of remaining case after seating. </p><p></p><p>Anyone got quickload and help me out here?</p><p></p><p>Trying to make sure i don't get into pressure issues or secondary explosion. Rule of thumb for fast powders would be never go below 30% fill. certainly nowhere near that just looking for some advice I'm a mac user and have no way to use quickload. </p><p></p><p>can someone run this for me please?</p></blockquote><p></p>
[QUOTE="kweidner, post: 1010881, member: 4964"] Developing some 300 blackout subsonic stuff. I have a question for those of you that have quickload. Viht n133 sits right between IMR and hodgdon 4198. plenty of data on 4198 but none on N133. Hodgdon shows a 208 amax subsonic load of 11 grains of 4198 it also shows a 16.9 grain compressed load in a bullet similar so the bulkiness is real close as you will see below. I have a swaged 190 hollowpoint jacketed I would like to use along with n133 as I have 16#. After seating bullet, there is 1.03 inches left for powder in the case. I filled the case to where the bullet would not compress the powder and then weighed and came up with a 100 percent fill non compressed as 15.9 grains . 11 grains of n133 would give a 69% 10 grains is 56% fill of remaining case after seating. Anyone got quickload and help me out here? Trying to make sure i don't get into pressure issues or secondary explosion. Rule of thumb for fast powders would be never go below 30% fill. certainly nowhere near that just looking for some advice I'm a mac user and have no way to use quickload. can someone run this for me please? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Not long range but powder question quickload help?
Top