Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
New .243 Carry Rifle
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="SteveBurton" data-source="post: 980694" data-attributes="member: 59541"><p>The stock had some flash over the pillars so I removed that. That was quickly done with a razor blade. Sorry, I removed it before taking a photo.</p><p></p><p>When I installed the bottom metal, there was some contact on a web under the bedding block. This caused it to see-saw from front to back. I didn't want to induce any torque on it so I removed some material with sand paper for proper clearance.</p><p></p><p>I also removed the pressure pad at the front of the fore-end to free float the barrel. I went a little crazy with the Dremel tool and then cleaned it up with some sand paper. Then I put a coat of black paint on it to seal it up.</p><p></p><p>There are some voids in the stock material that you can see in a couple of pics.</p></blockquote><p></p>
[QUOTE="SteveBurton, post: 980694, member: 59541"] The stock had some flash over the pillars so I removed that. That was quickly done with a razor blade. Sorry, I removed it before taking a photo. When I installed the bottom metal, there was some contact on a web under the bedding block. This caused it to see-saw from front to back. I didn't want to induce any torque on it so I removed some material with sand paper for proper clearance. I also removed the pressure pad at the front of the fore-end to free float the barrel. I went a little crazy with the Dremel tool and then cleaned it up with some sand paper. Then I put a coat of black paint on it to seal it up. There are some voids in the stock material that you can see in a couple of pics. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
New .243 Carry Rifle
Top