Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need some help with headspacing for a .300 WBY Mag.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Ridge Runner" data-source="post: 288015" data-attributes="member: 951"><p>here is what I do, </p><p>in a 300 wea. mag, I'd either punch a 32 or 338 cal expander ball down in a fired case, then start with my die up higher than it needs to be and start resizing a well lubed case, screwing the die down as I went and closely watch the progress, when it gets close start trying it in the chamber, when the bolt will close with just a bit of resistance. screw the die down 1/16th to 1/8th turn and lock it down. the die is set for minimal headspace in your chamber.</p><p>RR</p></blockquote><p></p>
[QUOTE="Ridge Runner, post: 288015, member: 951"] here is what I do, in a 300 wea. mag, I'd either punch a 32 or 338 cal expander ball down in a fired case, then start with my die up higher than it needs to be and start resizing a well lubed case, screwing the die down as I went and closely watch the progress, when it gets close start trying it in the chamber, when the bolt will close with just a bit of resistance. screw the die down 1/16th to 1/8th turn and lock it down. the die is set for minimal headspace in your chamber. RR [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need some help with headspacing for a .300 WBY Mag.
Top