Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need some help, very confused, trying to load some hammer hunters
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="fish4food1" data-source="post: 1571771" data-attributes="member: 77671"><p>I had a similar problem a while back with some 243 win loads. They would chamber roughly.....you had to force the bolt to close to get them to chamber. I reviewed my loading steps and could not figure out what I did wrong...so I called my mentor and he told me to check my shell holder. Well I did and i was using a RCBS shell holder with a Hornady sizing die......so I put a Hornady shell holder on the press and made a couple of loads and ......they worked properly....problem solved. From then on I always use a shell holder manufactured by the same company as the die manufacturer. Not sure what you are using , but wanted to relate the problem I had and fortunately I was a simple fix.</p></blockquote><p></p>
[QUOTE="fish4food1, post: 1571771, member: 77671"] I had a similar problem a while back with some 243 win loads. They would chamber roughly.....you had to force the bolt to close to get them to chamber. I reviewed my loading steps and could not figure out what I did wrong...so I called my mentor and he told me to check my shell holder. Well I did and i was using a RCBS shell holder with a Hornady sizing die......so I put a Hornady shell holder on the press and made a couple of loads and ......they worked properly....problem solved. From then on I always use a shell holder manufactured by the same company as the die manufacturer. Not sure what you are using , but wanted to relate the problem I had and fortunately I was a simple fix. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need some help, very confused, trying to load some hammer hunters
Top