Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need Help With .300 WM Loads (No Accuracy) (Bolt Hard To Close)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Nomad" data-source="post: 169890" data-attributes="member: 8778"><p>Take a fired case put in your die and and start screwing down your</p><p>die 1/8th turn then try in your rifle see if its hard repeat until the bolt</p><p>closes easy with just a little resistance. </p><p> Now place a bullet in a "UNprimed" case that works smooth in your rifle</p><p>measure the length about 40thousands over size now take a candle and</p><p>put the smoke on the bullet end and see how it fits if too long rifling </p><p>marks will be on the bullet turn down the bullet until marks are gone should</p><p>be 3 to 7 thousands off the riflings generally works at this point.</p><p> A load that works very well for a 300 Win with a 200 sgk is 76.5 RL-25</p><p>215M primers in Win cases. </p><p> Good luck on your hunt..</p></blockquote><p></p>
[QUOTE="Nomad, post: 169890, member: 8778"] Take a fired case put in your die and and start screwing down your die 1/8th turn then try in your rifle see if its hard repeat until the bolt closes easy with just a little resistance. Now place a bullet in a "UNprimed" case that works smooth in your rifle measure the length about 40thousands over size now take a candle and put the smoke on the bullet end and see how it fits if too long rifling marks will be on the bullet turn down the bullet until marks are gone should be 3 to 7 thousands off the riflings generally works at this point. A load that works very well for a 300 Win with a 200 sgk is 76.5 RL-25 215M primers in Win cases. Good luck on your hunt.. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need Help With .300 WM Loads (No Accuracy) (Bolt Hard To Close)
Top