Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need Help....Heavy Powder Residue On Case...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="IDelkhunter" data-source="post: 1116982" data-attributes="member: 43404"><p>Hey folks,</p><p></p><p>Hoping someone can help me. I have attached a couple of pictures of cases from load development on my Defensive Edge 7mmSTW. I was doing an OCW load test and all cases from min load to max load exhibited this level of residue. I could smell powder after each shot and decided to stop after 7-8 rounds. I have never seen it any of my other guns....wondering if it is a safety issue or if something is wrong? Here are the specifics:</p><p></p><p>Carlock Defensive Edge 7mmSTW</p><p>Virgin Nosler Brass sized with .311 S Bushing die giving me .002" neck tension</p><p>CCI250 Primer</p><p>H1000 loads from 72-76 grains</p><p>180 Berger Hybrids</p><p>.020" off lands leaving me only about .140-150" bearing engagement with the neck </p><p></p><p>Any thoughts on cause/corrective action?</p><p></p><p>Thanks for your help,</p><p></p><p>Marcus</p></blockquote><p></p>
[QUOTE="IDelkhunter, post: 1116982, member: 43404"] Hey folks, Hoping someone can help me. I have attached a couple of pictures of cases from load development on my Defensive Edge 7mmSTW. I was doing an OCW load test and all cases from min load to max load exhibited this level of residue. I could smell powder after each shot and decided to stop after 7-8 rounds. I have never seen it any of my other guns....wondering if it is a safety issue or if something is wrong? Here are the specifics: Carlock Defensive Edge 7mmSTW Virgin Nosler Brass sized with .311 S Bushing die giving me .002" neck tension CCI250 Primer H1000 loads from 72-76 grains 180 Berger Hybrids .020" off lands leaving me only about .140-150" bearing engagement with the neck Any thoughts on cause/corrective action? Thanks for your help, Marcus [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Need Help....Heavy Powder Residue On Case...
Top