Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Necking 30-06 to 25-06 results in blown primer
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Dean2" data-source="post: 2185568" data-attributes="member: 26077"><p>Read my post just above yours, I think it will help you. As far as annealing, in general you are far better off to anneal AFTER sizing. Too soft a brass just promotes necks collpasing when you neck down. One thing that will make necking down much eaier, and less prone to over thickening the necks is to remove the stem from the seating die, set the die one full turn off of contacting the shell holder, then run the 30-06 brass into the 25-06 seater. Then run them through the FL sizing die. Using the seater as an intemediate step really makes sizing much easier.</p></blockquote><p></p>
[QUOTE="Dean2, post: 2185568, member: 26077"] Read my post just above yours, I think it will help you. As far as annealing, in general you are far better off to anneal AFTER sizing. Too soft a brass just promotes necks collpasing when you neck down. One thing that will make necking down much eaier, and less prone to over thickening the necks is to remove the stem from the seating die, set the die one full turn off of contacting the shell holder, then run the 30-06 brass into the 25-06 seater. Then run them through the FL sizing die. Using the seater as an intemediate step really makes sizing much easier. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Necking 30-06 to 25-06 results in blown primer
Top