Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck turned too much?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AZShooter" data-source="post: 817590" data-attributes="member: 5219"><p>I discovered something interesting when I turned down the 30 BR brass to .0105" neck wall thickness.</p><p></p><p> While I had a bushing die I decided to see what the RCBS FL die would do without the expander ball. It was a perfect .002" reduction in neck diameter. I actually quit using the bushing die! I set up the die for the exact shoulder bump and used a feeler gauge to measure the space between shell holder and die. After that I could instantly setup the FL die. </p><p></p><p>Who knows your standard FL die might work perfectly without the sizer ball if you necks are the right dimension.</p></blockquote><p></p>
[QUOTE="AZShooter, post: 817590, member: 5219"] I discovered something interesting when I turned down the 30 BR brass to .0105" neck wall thickness. While I had a bushing die I decided to see what the RCBS FL die would do without the expander ball. It was a perfect .002" reduction in neck diameter. I actually quit using the bushing die! I set up the die for the exact shoulder bump and used a feeler gauge to measure the space between shell holder and die. After that I could instantly setup the FL die. Who knows your standard FL die might work perfectly without the sizer ball if you necks are the right dimension. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck turned too much?
Top