Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
neck sizing??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AZShooter" data-source="post: 989019" data-attributes="member: 5219"><p>The family of cartridges has to be considered. What is it? I don't think you want to size down .044" in one pass. </p><p></p><p>Lets say you wanted to neck down a 30-06 to 6.5-06. You could put it in a 280 seater die which is larger than the 280 FL die. Then go to the 280 FL followed by the 6.5-06 seater die then the 6.5-06 FL die. </p><p></p><p>If this is a wildcat you might have to make your own form die. Whidden could help with that. I once made a form die for sizing down the 284 win brass to 6mm-284. I used an old 264 barrel and the 6mm-284 chamber reamer. Sanded the die quite a bit to open it up. Was able to get the brass partially necked then finished with the 6mm-284 FL die.</p></blockquote><p></p>
[QUOTE="AZShooter, post: 989019, member: 5219"] The family of cartridges has to be considered. What is it? I don't think you want to size down .044" in one pass. Lets say you wanted to neck down a 30-06 to 6.5-06. You could put it in a 280 seater die which is larger than the 280 FL die. Then go to the 280 FL followed by the 6.5-06 seater die then the 6.5-06 FL die. If this is a wildcat you might have to make your own form die. Whidden could help with that. I once made a form die for sizing down the 284 win brass to 6mm-284. I used an old 264 barrel and the 6mm-284 chamber reamer. Sanded the die quite a bit to open it up. Was able to get the brass partially necked then finished with the 6mm-284 FL die. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
neck sizing??
Top