Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
My New Remarms ADL 7mm RM.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="xsn10s" data-source="post: 3073626" data-attributes="member: 95344"><p>Ok so I had to modify the safety on the new/ old Walker trigger. It had the "lock the bolt" type safety lever. But the new Remarms actions aren't cut for it so it won't fit. I cut the extend part of the lever with a cutting wheel and now it fits. Cleaned the trigger with cigarette lighter fluid and scrapped off all the glue. I reset the sear engagement since it didn't have enough sear engagement imo. So after that I reset the over travel and the trigger weight. It breaks very clean with almost no overtravel. I set the weight at 2 1/4 lbs and checked it for safe function. Re-glued all the screws and put it back into the KRG Bravo stock. First pull felt like it was under 2 lbs. It actually feels lighter than 1 1/2 lbs. I'll test it throughout the day and then pull the action off the stock tomorrow for more safety and trigger pull weight tests. If it still feels to light I'll increase the trigger pull weight and maybe even the sear engagement.</p></blockquote><p></p>
[QUOTE="xsn10s, post: 3073626, member: 95344"] Ok so I had to modify the safety on the new/ old Walker trigger. It had the "lock the bolt" type safety lever. But the new Remarms actions aren't cut for it so it won't fit. I cut the extend part of the lever with a cutting wheel and now it fits. Cleaned the trigger with cigarette lighter fluid and scrapped off all the glue. I reset the sear engagement since it didn't have enough sear engagement imo. So after that I reset the over travel and the trigger weight. It breaks very clean with almost no overtravel. I set the weight at 2 1/4 lbs and checked it for safe function. Re-glued all the screws and put it back into the KRG Bravo stock. First pull felt like it was under 2 lbs. It actually feels lighter than 1 1/2 lbs. I'll test it throughout the day and then pull the action off the stock tomorrow for more safety and trigger pull weight tests. If it still feels to light I'll increase the trigger pull weight and maybe even the sear engagement. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
My New Remarms ADL 7mm RM.
Top