Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Match vs standard chamber
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 1368957" data-attributes="member: 2736"><p>Match chambers are no more than chambers with slightly different dimensions. If you reload, the quality of the sizing will make the chamber perform as good as a "Match chamber" if they are both cut buy a good reamer and smith.</p><p></p><p>Annealing will help with uniform neck tension and a good set of bushing dies will size them very precisely.</p><p></p><p>If you are thinking about a new chamber the 223 Wylde is a good all round chamber and the 223 AI will extend the brass life and add some velocity with the 40o shoulder.</p><p></p><p>Match reamers/chambers can be problematic unless you turn all the necks and understand the effects of such dimension changes.</p><p></p><p>A standard SAMME chamber is just as accurate if fed quality re loads.</p><p></p><p>Just my opinion</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 1368957, member: 2736"] Match chambers are no more than chambers with slightly different dimensions. If you reload, the quality of the sizing will make the chamber perform as good as a "Match chamber" if they are both cut buy a good reamer and smith. Annealing will help with uniform neck tension and a good set of bushing dies will size them very precisely. If you are thinking about a new chamber the 223 Wylde is a good all round chamber and the 223 AI will extend the brass life and add some velocity with the 40o shoulder. Match reamers/chambers can be problematic unless you turn all the necks and understand the effects of such dimension changes. A standard SAMME chamber is just as accurate if fed quality re loads. Just my opinion J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Match vs standard chamber
Top