Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Making .270 out of 30-06 brass?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="7mmRHB" data-source="post: 359817" data-attributes="member: 3584"><p>A light ,even coat is all you'll need. Too much can put dents in the shoulder face. After you size the first case, with the press handle still down, screw the expander button rod up until the button touches the bottom of the neck, then back it off 1/2 turn and leave the rod loose so the button can float when pulled through the neck ( well lubed inside neck ). This will help keep the necks straight for the rest of the process. Good luck!! --- RHB</p></blockquote><p></p>
[QUOTE="7mmRHB, post: 359817, member: 3584"] A light ,even coat is all you'll need. Too much can put dents in the shoulder face. After you size the first case, with the press handle still down, screw the expander button rod up until the button touches the bottom of the neck, then back it off 1/2 turn and leave the rod loose so the button can float when pulled through the neck ( well lubed inside neck ). This will help keep the necks straight for the rest of the process. Good luck!! --- RHB [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Making .270 out of 30-06 brass?
Top