Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Loading process
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Rflamm250" data-source="post: 1567171" data-attributes="member: 105493"><p>I switched a few years back. My process is as follows</p><p>1. Decap</p><p>2. Media tumble</p><p>3. Run through bushing die with no expander ball or as of late a FL die with no expander ball. I take the whole guts out a Whidden FL die.</p><p>4. Sinclair expander or neck turn mandrel.</p><p>5. tumble again(just to remove lube)</p><p>6. trim and load </p><p>Im actually having better results with the FL die without expander vs Bushing die without. If you use a FL die without expander ball you will have to run brass through a mandrel after sizing. If you use the bushing die with the correct bushing you do not have to use a mandrel. Most people using a bushing die without an expander ball are using a bushing .002 to .003 under loaded round measurement with no mandrel. If you are going to use a mandrel after sizing with a bushing die I use bushing size .003-.004 under loaded round measurement then run brass through the mandrel.</p></blockquote><p></p>
[QUOTE="Rflamm250, post: 1567171, member: 105493"] I switched a few years back. My process is as follows 1. Decap 2. Media tumble 3. Run through bushing die with no expander ball or as of late a FL die with no expander ball. I take the whole guts out a Whidden FL die. 4. Sinclair expander or neck turn mandrel. 5. tumble again(just to remove lube) 6. trim and load Im actually having better results with the FL die without expander vs Bushing die without. If you use a FL die without expander ball you will have to run brass through a mandrel after sizing. If you use the bushing die with the correct bushing you do not have to use a mandrel. Most people using a bushing die without an expander ball are using a bushing .002 to .003 under loaded round measurement with no mandrel. If you are going to use a mandrel after sizing with a bushing die I use bushing size .003-.004 under loaded round measurement then run brass through the mandrel. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Loading process
Top