Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
loading for sub 1MOA accuracy (components/equipment) and steps
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DUSTY NOGGIN" data-source="post: 1728983" data-attributes="member: 89550"><p>separate operation using universal depriming tool first , then all prep work .... lube inside and out , then size all brass.... tumble all the lube off</p><p></p><p>on sale now at midway</p><p><a href="https://www.midwayusa.com/product/1011420955?pid=172544" target="_blank">https://www.midwayusa.com/product/1011420955?pid=172544</a></p><p></p><p>size the case full length as you normally would , pull the brass out until its gets freed from the neck squeezing portion of the die , bring the ram down just until you feel it wanting to start sizing the outside of the neck again, then, adjust the expander up until it either touches the brass or stops ((if your die stops first it will not do this function)) . if , you can touch the brass pull the brass out and lift your expander up just a little more (( you decide )) . essentially, overlapping the 2 sizing functions of the same die.</p><p></p><p>annealing before this operation will really reduce the felt resistance , </p><p></p><p>you will stop feeling that area in the middle of the sizing operation where the brass isnt touching anything</p></blockquote><p></p>
[QUOTE="DUSTY NOGGIN, post: 1728983, member: 89550"] separate operation using universal depriming tool first , then all prep work .... lube inside and out , then size all brass.... tumble all the lube off on sale now at midway [URL]https://www.midwayusa.com/product/1011420955?pid=172544[/URL] size the case full length as you normally would , pull the brass out until its gets freed from the neck squeezing portion of the die , bring the ram down just until you feel it wanting to start sizing the outside of the neck again, then, adjust the expander up until it either touches the brass or stops ((if your die stops first it will not do this function)) . if , you can touch the brass pull the brass out and lift your expander up just a little more (( you decide )) . essentially, overlapping the 2 sizing functions of the same die. annealing before this operation will really reduce the felt resistance , you will stop feeling that area in the middle of the sizing operation where the brass isnt touching anything [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
loading for sub 1MOA accuracy (components/equipment) and steps
Top