Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
List of brass reforming options?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="tbrice23" data-source="post: 1171665" data-attributes="member: 59502"><p>I have taken screen shots of SAMMI specs and compared differences. So I think you are on the right track.</p><p></p><p>I recently converted 300wsm to 270wsm and found it easiest to size in steps. Since I didn't have bushing dies to step down in sizes I did have 300wsm and 270wsm FL dies. I first sized without the expader ball with the 300wsm die ,that made the final sizing easier. </p><p>You could see if Lee makes a cheap 325 FL die to use w/o the expander ball. Otherwise I'd try to get a bushing die with intermediate bushings to size down.</p><p>I feel you pain. Once had to use 338 wm brass to make 7rm brass. Anyway I hope this helps.</p><p></p><p>Also you will most likely need to neck turn.</p></blockquote><p></p>
[QUOTE="tbrice23, post: 1171665, member: 59502"] I have taken screen shots of SAMMI specs and compared differences. So I think you are on the right track. I recently converted 300wsm to 270wsm and found it easiest to size in steps. Since I didn't have bushing dies to step down in sizes I did have 300wsm and 270wsm FL dies. I first sized without the expader ball with the 300wsm die ,that made the final sizing easier. You could see if Lee makes a cheap 325 FL die to use w/o the expander ball. Otherwise I'd try to get a bushing die with intermediate bushings to size down. I feel you pain. Once had to use 338 wm brass to make 7rm brass. Anyway I hope this helps. Also you will most likely need to neck turn. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
List of brass reforming options?
Top