Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
lapua brass failure?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="deathwobble" data-source="post: 1005089" data-attributes="member: 51173"><p>It failed at the web. I did bump the brass as it needed. I did this mainly for uniformity. necks where turned down to .0135" giving me a loaded neck diameter of .291-1/2" or 2-2.5 thou" neck clearance. which has worked well for me in the past. It just seems like there may be a defect with my brass. there is no pressure signs. of course there was a sticky bolt lift but Im pretty sure this was cause by the case being a little tweeked from the web separation.. Now I know that Lapua makes a fine product and Im not trying to pick on them. I guess my question should have been more generalized in terms of brand name. Anyway I picked up some new Nosler brass in 270win. and Im gonna switch to H4350 instead of the IMR and rework out my loads.</p></blockquote><p></p>
[QUOTE="deathwobble, post: 1005089, member: 51173"] It failed at the web. I did bump the brass as it needed. I did this mainly for uniformity. necks where turned down to .0135" giving me a loaded neck diameter of .291-1/2" or 2-2.5 thou" neck clearance. which has worked well for me in the past. It just seems like there may be a defect with my brass. there is no pressure signs. of course there was a sticky bolt lift but Im pretty sure this was cause by the case being a little tweeked from the web separation.. Now I know that Lapua makes a fine product and Im not trying to pick on them. I guess my question should have been more generalized in terms of brand name. Anyway I picked up some new Nosler brass in 270win. and Im gonna switch to H4350 instead of the IMR and rework out my loads. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
lapua brass failure?
Top