Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
lapua brass failure?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="deathwobble" data-source="post: 1004697" data-attributes="member: 51173"><p>Hi ....has any one had lapua brass fail with moderate loads. I've had 2 fail from the same lot. </p><p>Background- </p><p>Rifle:rem700LA trued,blued</p><p>Caliber:6.5-06 .296neck</p><p>Barrel:26"brux#17</p><p>Load:46grs</p><p>Powder:imr4350</p><p>Bullet:140grn berger hybrid</p><p>Brass:lapua 30-06 necked down and turned.</p><p></p><p>Now I ve worked this load up to 49grns before pressure signs.</p><p>The brass in question has had 3 loads....annealed on the 2nd. All brass were weight sorted and capacity checked with h20. After fire forming the brass was shoulder bumped and neck sized useing a bushing die. Bullet is .015 off and checked every load..... I just find it odd to have a case fail like this after 3 loads....anyone else experience this?</p></blockquote><p></p>
[QUOTE="deathwobble, post: 1004697, member: 51173"] Hi ....has any one had lapua brass fail with moderate loads. I've had 2 fail from the same lot. Background- Rifle:rem700LA trued,blued Caliber:6.5-06 .296neck Barrel:26"brux#17 Load:46grs Powder:imr4350 Bullet:140grn berger hybrid Brass:lapua 30-06 necked down and turned. Now I ve worked this load up to 49grns before pressure signs. The brass in question has had 3 loads....annealed on the 2nd. All brass were weight sorted and capacity checked with h20. After fire forming the brass was shoulder bumped and neck sized useing a bushing die. Bullet is .015 off and checked every load..... I just find it odd to have a case fail like this after 3 loads....anyone else experience this? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
lapua brass failure?
Top