Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Lapping Vertical Scope Rings
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="SidecarFlip" data-source="post: 618539" data-attributes="member: 39764"><p>Like post number 2 states... Be sure they actually need lapped in the first place. That's easy to do too, either by using Dykem and the lapping bar without lapping compound or the optic itself if it's a keeper because you'll rotate the optic in the rings to remove the bluing and observe if, any high spots or misalignment is present and using the optic may mar the tube.</p><p> </p><p>Mount the rings in their respective locations as related to eye relief and rail position and snug the mounts (even torque again) until the optic tube or lap bar moves (rotationally) with slight resistance and rotate the bar or optic a revolution or 2 and remove. That will impart the reference marks.</p></blockquote><p></p>
[QUOTE="SidecarFlip, post: 618539, member: 39764"] Like post number 2 states... Be sure they actually need lapped in the first place. That's easy to do too, either by using Dykem and the lapping bar without lapping compound or the optic itself if it's a keeper because you'll rotate the optic in the rings to remove the bluing and observe if, any high spots or misalignment is present and using the optic may mar the tube. Mount the rings in their respective locations as related to eye relief and rail position and snug the mounts (even torque again) until the optic tube or lap bar moves (rotationally) with slight resistance and rotate the bar or optic a revolution or 2 and remove. That will impart the reference marks. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Lapping Vertical Scope Rings
Top