Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
La Pua [From 30-06 to 25-06] Help!!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Rooster 50" data-source="post: 147394" data-attributes="member: 7552"><p>[ QUOTE ]</p><p>Haven't tried Lapua 30-06 to 25-06 but did try Norma for same thing. What a waste of time and good brass neck turned till I was blue in the face both inside and out. Did learn a lot though. Give it a try use the 270 mdie if you have one make it a lot easier. </p><p></p><p>[/ QUOTE ]</p><p></p><p></p><p>I went back and dug out what I could of my notes from this experimint. It turns out I tried to use Norma 270 to make 25-06AI brass. It turns out that there were questions about trimming and when to do it. The case I believe is longer than the 25-06. I would have been better off to use 30-06 and neck it down. Bottom line is I didn't end up with brass that gave me better accuracy soafter a lot of side by side testing I scrapped the experimint. I did however get as many as 12 loadings with Winchester brass by doing minimal sizing, and not shooting the hottest loads I could find.</p></blockquote><p></p>
[QUOTE="Rooster 50, post: 147394, member: 7552"] [ QUOTE ] Haven't tried Lapua 30-06 to 25-06 but did try Norma for same thing. What a waste of time and good brass neck turned till I was blue in the face both inside and out. Did learn a lot though. Give it a try use the 270 mdie if you have one make it a lot easier. [/ QUOTE ] I went back and dug out what I could of my notes from this experimint. It turns out I tried to use Norma 270 to make 25-06AI brass. It turns out that there were questions about trimming and when to do it. The case I believe is longer than the 25-06. I would have been better off to use 30-06 and neck it down. Bottom line is I didn't end up with brass that gave me better accuracy soafter a lot of side by side testing I scrapped the experimint. I did however get as many as 12 loadings with Winchester brass by doing minimal sizing, and not shooting the hottest loads I could find. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
La Pua [From 30-06 to 25-06] Help!!!
Top