Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Interesting Load Development Results
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Jud96" data-source="post: 2007812" data-attributes="member: 69478"><p>I also wanted to go back and see where once fired brass put me as far as velocity and charge weight. So that is why I tested 69.5, 69.7, and 70.0 grains. As you can see 69.7 was right in the middle and proved to have decent ES and shot a 1/4" group. So both the velocity method and OCW method landed me on the same load that shot 1/4" or better and had good velocity spread.</p></blockquote><p></p>
[QUOTE="Jud96, post: 2007812, member: 69478"] I also wanted to go back and see where once fired brass put me as far as velocity and charge weight. So that is why I tested 69.5, 69.7, and 70.0 grains. As you can see 69.7 was right in the middle and proved to have decent ES and shot a 1/4” group. So both the velocity method and OCW method landed me on the same load that shot 1/4” or better and had good velocity spread. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Interesting Load Development Results
Top