Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Inside or Outside
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Schnyd112" data-source="post: 1495605" data-attributes="member: 90453"><p>Turning on the outside also allows you to cut into the shoulder just slightly to form a bit of a shelf at the neck shoulder junction. When you fire it, this forms on the inside and can help prevent donuts because the neck is thicker than the neck/shoulder junction. Inside reaming can remove donuts but they will always come back because you creat a 90 convex corner of brass that has nothing to keep it from following the bullet and flowing into th bottom of the neck.</p><p></p><p>If you inside neck ream, you are more limited by your die, or your drill. Outside neck turning you expand with a mandrel then turn the brass on the same sized mandrel, you are more limited by your skill. It takes some time to get the feel and the speed and everything right. I ruined some cases, then decided to practice on crappy brass, now I have it down pretty good. I can turn to .0145, .0140, .0135 and so on pretty consistently with the adjustment marks on my k&m tool.</p><p></p><p>This is easier to explain with a drawing, if my explanation doesn't make sense let me know.</p></blockquote><p></p>
[QUOTE="Schnyd112, post: 1495605, member: 90453"] Turning on the outside also allows you to cut into the shoulder just slightly to form a bit of a shelf at the neck shoulder junction. When you fire it, this forms on the inside and can help prevent donuts because the neck is thicker than the neck/shoulder junction. Inside reaming can remove donuts but they will always come back because you creat a 90 convex corner of brass that has nothing to keep it from following the bullet and flowing into th bottom of the neck. If you inside neck ream, you are more limited by your die, or your drill. Outside neck turning you expand with a mandrel then turn the brass on the same sized mandrel, you are more limited by your skill. It takes some time to get the feel and the speed and everything right. I ruined some cases, then decided to practice on crappy brass, now I have it down pretty good. I can turn to .0145, .0140, .0135 and so on pretty consistently with the adjustment marks on my k&m tool. This is easier to explain with a drawing, if my explanation doesn’t make sense let me know. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Inside or Outside
Top