Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
input on 6mm something or other coyote rig build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Trickymissfit" data-source="post: 737305" data-attributes="member: 25383"><p>The 6/250AI I shoot uses .243 brass cut down. I do this for case shrinkage alone, and I still see .04" in the necks. The 6xc is easier to do, and that's pretty much what I fire form off of. I end up with 1.885" over all lengths, and really want to address this problem this comming year with a longer necked reamer of some sort. I'd like to do the .35" full neck length of the 6mm Ackley, but with the shorter shoulder length of the 250AI. That way I think I'll come out with a neck length of about .32". This will seriously increase the throat life, and make it easier to handle light weight bullets at the sametime.</p><p> </p><p>I see about 3000 fps with the 105 grain Amax and the Sierra 107's at near max loads. </p><p>gary</p></blockquote><p></p>
[QUOTE="Trickymissfit, post: 737305, member: 25383"] The 6/250AI I shoot uses .243 brass cut down. I do this for case shrinkage alone, and I still see .04" in the necks. The 6xc is easier to do, and that's pretty much what I fire form off of. I end up with 1.885" over all lengths, and really want to address this problem this comming year with a longer necked reamer of some sort. I'd like to do the .35" full neck length of the 6mm Ackley, but with the shorter shoulder length of the 250AI. That way I think I'll come out with a neck length of about .32". This will seriously increase the throat life, and make it easier to handle light weight bullets at the sametime. I see about 3000 fps with the 105 grain Amax and the Sierra 107's at near max loads. gary [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
input on 6mm something or other coyote rig build
Top