Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Info on the 6.5 Mystic
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Coyboy" data-source="post: 101327" data-attributes="member: 3733"><p>Jerry, I need you to look at your link. Your neck measurement is wrong, I think you read the wrong numbers next to the blue lines.</p><p></p><p>The cartrige OAL is 2.800, To the neck mouth is 2.035 this is wear you mistakenly got the .765" neck?</p><p></p><p>2.035 is brass length-1.7756 is where neck meets shoulder. This equals .260" neck length.</p><p></p><p>I load factory 260 brass and fireform. No headspace issue slight crush fit on 260 rem shoulder. The reamer is a 308-6.5 Ackley Imp.</p><p></p><p>Yes compressed load, I plan on switching to 4831SC. I had this load up to 3020fps before I showed any pressure signs(extractor marks, flattened primers) The current load has very good looking case heads, no marks what so ever.</p><p></p><p>Measuring one of my fired cases I get;</p><p></p><p>2.015" oal</p><p>1.760" base to neck shoulder junction.</p><p>1.660" body to shoulder junction.</p><p></p><p>Does this help?</p><p>Jim</p></blockquote><p></p>
[QUOTE="Coyboy, post: 101327, member: 3733"] Jerry, I need you to look at your link. Your neck measurement is wrong, I think you read the wrong numbers next to the blue lines. The cartrige OAL is 2.800, To the neck mouth is 2.035 this is wear you mistakenly got the .765" neck? 2.035 is brass length-1.7756 is where neck meets shoulder. This equals .260" neck length. I load factory 260 brass and fireform. No headspace issue slight crush fit on 260 rem shoulder. The reamer is a 308-6.5 Ackley Imp. Yes compressed load, I plan on switching to 4831SC. I had this load up to 3020fps before I showed any pressure signs(extractor marks, flattened primers) The current load has very good looking case heads, no marks what so ever. Measuring one of my fired cases I get; 2.015" oal 1.760" base to neck shoulder junction. 1.660" body to shoulder junction. Does this help? Jim [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Info on the 6.5 Mystic
Top