Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
IMR 8133
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="David M" data-source="post: 1644804" data-attributes="member: 109373"><p>338-378 IMR8133 and H1000 updates: 270 grain ELD-X bullets Fed 215 primer</p><p></p><p>H1000 105 grains 3003fps, 2982fps, 3044fps sub moa and if the shooter could shoot I think this may be a "cloverleaf" load. 2 out of 3 touching at 100yds. No signs of pressure CAOL 3.826 to 3.833</p><p></p><p>IMR8133 109 grains 2969fps, 2943fps, 3016fps there was a minor extractor mark on this last shot. This load was almost 3 shots in the same hole, it seems very accurate.</p><p>COAL 3.826 to 3.833.</p><p></p><p>Both of these loads need to have the COAL reduced by .020 or so for proper feeding from my magazine, hopefully that won't screw up my accuracy and I'm assuming that I will have to reduce powder charges a little to accommodate the case volume reduction. The loads are showing good accuracy (hunting) and I'm now pretty hopeful that the rifle will satisfy my goals.</p><p></p><p>More to come,</p><p></p><p>Dave</p></blockquote><p></p>
[QUOTE="David M, post: 1644804, member: 109373"] 338-378 IMR8133 and H1000 updates: 270 grain ELD-X bullets Fed 215 primer H1000 105 grains 3003fps, 2982fps, 3044fps sub moa and if the shooter could shoot I think this may be a "cloverleaf" load. 2 out of 3 touching at 100yds. No signs of pressure CAOL 3.826 to 3.833 IMR8133 109 grains 2969fps, 2943fps, 3016fps there was a minor extractor mark on this last shot. This load was almost 3 shots in the same hole, it seems very accurate. COAL 3.826 to 3.833. Both of these loads need to have the COAL reduced by .020 or so for proper feeding from my magazine, hopefully that won't screw up my accuracy and I'm assuming that I will have to reduce powder charges a little to accommodate the case volume reduction. The loads are showing good accuracy (hunting) and I'm now pretty hopeful that the rifle will satisfy my goals. More to come, Dave [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
IMR 8133
Top