Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
IMR 7828SCC with 6MM Creedmoor
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hugnot" data-source="post: 2063306" data-attributes="member: 115658"><p>The 6.5 CM has roughly similar case capacities as the .243 W, depending on bullet shape & seating depth.</p><p></p><p>Hodgdon data has .243 W data for 48.0 gr of 7828 with a 90 grain bullet at 50.6 CUP with reasonable velocities of 3130, about 5 % lower than max velocities shown. The short cut 7828 might allow an increased charge.</p><p></p><p>Not optimum but useable.</p><p></p><p>I use Rem 7 1/2 primers in my 6.5X47 L with H4350 & such with no problems.</p></blockquote><p></p>
[QUOTE="Hugnot, post: 2063306, member: 115658"] The 6.5 CM has roughly similar case capacities as the .243 W, depending on bullet shape & seating depth. Hodgdon data has .243 W data for 48.0 gr of 7828 with a 90 grain bullet at 50.6 CUP with reasonable velocities of 3130, about 5 % lower than max velocities shown. The short cut 7828 might allow an increased charge. Not optimum but useable. I use Rem 7 1/2 primers in my 6.5X47 L with H4350 & such with no problems. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
IMR 7828SCC with 6MM Creedmoor
Top