Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Idiot Needs Help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="338 dude" data-source="post: 2004792" data-attributes="member: 106967"><p>I would not mess with your chamber just yet I have had problems that sound a lot like yours where they modified case does not very closely resemble my chamber therefore when you use your own cases your bolt does not close you know if it's your bullet or the case take a black sharpie color your bullet put it in action and try to close the bolt remove the bullet and look for marks on the bullet if you have a 5 groove barrel you'll see five distinct marks where it removed the black from the bullet if it is not touching the bullet it is definitely the brass I do not use the Hornady modified case anymore I would have one made from a fired piece of brass from my chamber or just use the colored bullet Mark method load the bullet Long chamber confirm Marks then seat the bullet .001 deeper color it again chamber it look for Marks keep doing this until you do not have marks that +.001 is your touch measurement</p></blockquote><p></p>
[QUOTE="338 dude, post: 2004792, member: 106967"] I would not mess with your chamber just yet I have had problems that sound a lot like yours where they modified case does not very closely resemble my chamber therefore when you use your own cases your bolt does not close you know if it’s your bullet or the case take a black sharpie color your bullet put it in action and try to close the bolt remove the bullet and look for marks on the bullet if you have a 5 groove barrel you’ll see five distinct marks where it removed the black from the bullet if it is not touching the bullet it is definitely the brass I do not use the Hornady modified case anymore I would have one made from a fired piece of brass from my chamber or just use the colored bullet Mark method load the bullet Long chamber confirm Marks then seat the bullet .001 deeper color it again chamber it look for Marks keep doing this until you do not have marks that +.001 is your touch measurement [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Idiot Needs Help
Top