Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Identifying loads during load development
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="memtb" data-source="post: 1618819" data-attributes="member: 75451"><p>I usually load and test in groups of 20. For that 20 round test group, the only variable will be the charge weight! If I go to a different component, that group of 20 will have the same component. </p><p></p><p> I use a small point magic marker, marking the cases with a small line similar to the Roman numeral 1. No marks indicates the lowest charge, one mark indicates the next higher charge. If you test which 5 rounds per charge, you'll end up with 3 lines on each of the heaviest loaded case. Obviously, if you test in groups of 3.....you'll end up with the heaviest loaded group of 3 cases with 5 lines, with 2 cases left over. To keep your fire count equal on your cases, load your remaining 2 cases with whichever load you may want to reverify, or step up to your next higher charge! Mark accordingly! </p><p></p><p> When testing seating depth, the same system could be used. memtb</p></blockquote><p></p>
[QUOTE="memtb, post: 1618819, member: 75451"] I usually load and test in groups of 20. For that 20 round test group, the only variable will be the charge weight! If I go to a different component, that group of 20 will have the same component. I use a small point magic marker, marking the cases with a small line similar to the Roman numeral 1. No marks indicates the lowest charge, one mark indicates the next higher charge. If you test which 5 rounds per charge, you’ll end up with 3 lines on each of the heaviest loaded case. Obviously, if you test in groups of 3.....you’ll end up with the heaviest loaded group of 3 cases with 5 lines, with 2 cases left over. To keep your fire count equal on your cases, load your remaining 2 cases with whichever load you may want to reverify, or step up to your next higher charge! Mark accordingly! When testing seating depth, the same system could be used. memtb [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Identifying loads during load development
Top