Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hitting pressure early in 6.5 PRC
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MTGEEZER" data-source="post: 2185830" data-attributes="member: 109472"><p>Again, if I remember correctly, Mr. Wheeler was addressing the problems with pressure and "clickers" in SAAMI cut 6.5 PRC chambers. Maybe it would be best to just refer you to his posts as I do not want to give bad advice or misquote a really well known Gunsmith. After 5 loads on the good ADG brass, I can no longer size the last .2-.3 inch (base) enough to prevent clickers. This is with a charge (for MY gun) of 54 gr. RL 23, CCI BR2 primer pushing a 124 gr. Hammer Hunter to a modest 3230 FPS. (Still makes critters alot easier to get into the freezer!) Good luck with your new barrel!</p></blockquote><p></p>
[QUOTE="MTGEEZER, post: 2185830, member: 109472"] Again, if I remember correctly, Mr. Wheeler was addressing the problems with pressure and "clickers" in SAAMI cut 6.5 PRC chambers. Maybe it would be best to just refer you to his posts as I do not want to give bad advice or misquote a really well known Gunsmith. After 5 loads on the good ADG brass, I can no longer size the last .2-.3 inch (base) enough to prevent clickers. This is with a charge (for MY gun) of 54 gr. RL 23, CCI BR2 primer pushing a 124 gr. Hammer Hunter to a modest 3230 FPS. (Still makes critters alot easier to get into the freezer!) Good luck with your new barrel! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hitting pressure early in 6.5 PRC
Top