Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Help needed in diagnosing an accuracy issue on a Bergara...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="mrjashu" data-source="post: 1553029" data-attributes="member: 100018"><p>I usually only shoot three shot groups, but it will put three inside .5 MOA without too much difficulty as long as I'm paying attention. That goes for factory 140g ELDM and my own handloads with 143g ELDX</p><p></p><p>I didn't take any pictures of the bedding process. But basically I used a dremel to grind down any spot that was going to receive epoxy by a few thousandths. I took particular pains to expose the aluminum pillars so they would be well bonded to the bedding. Leave the surfaces scuffed up and rough, clean with acetone then you just bed it like normal. </p><p></p><p>Here's a couple of groups with Hornady factory match 140g ELDM</p></blockquote><p></p>
[QUOTE="mrjashu, post: 1553029, member: 100018"] I usually only shoot three shot groups, but it will put three inside .5 MOA without too much difficulty as long as I'm paying attention. That goes for factory 140g ELDM and my own handloads with 143g ELDX I didn't take any pictures of the bedding process. But basically I used a dremel to grind down any spot that was going to receive epoxy by a few thousandths. I took particular pains to expose the aluminum pillars so they would be well bonded to the bedding. Leave the surfaces scuffed up and rough, clean with acetone then you just bed it like normal. Here's a couple of groups with Hornady factory match 140g ELDM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Help needed in diagnosing an accuracy issue on a Bergara...
Top