Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Headspcing with once fired brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Dgd6mm" data-source="post: 1127306" data-attributes="member: 12044"><p>Was the brass fl sized?</p><p></p><p>Too do this properly you need to set your fl sizing die using the fired brass and a hornaday headspace gauge. Seeing how you have 75 pieces you have plenty to set the die up with 1.5-2 thousandth shoulder bump. You use the fl sized case as a go-gauge, then take a piece of scotch tape that mic's out at .002, put it on the head of the case and use as a no-go gauge. You have the idea how to do it. gun) The way you did it was correct.</p></blockquote><p></p>
[QUOTE="Dgd6mm, post: 1127306, member: 12044"] Was the brass fl sized? Too do this properly you need to set your fl sizing die using the fired brass and a hornaday headspace gauge. Seeing how you have 75 pieces you have plenty to set the die up with 1.5-2 thousandth shoulder bump. You use the fl sized case as a go-gauge, then take a piece of scotch tape that mic's out at .002, put it on the head of the case and use as a no-go gauge. You have the idea how to do it. gun) The way you did it was correct. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Headspcing with once fired brass
Top